NEW POST: The diminutive “Morrow” is a 15cm (approx. 0.6-inches tall) resin figurine that has nested in this wonderfully upcycled wooden incense box with needle felted interiors. The box itself measures 2.5-inches tall x 3.4-inches wide x 2.25-inches deep and is signed & dated underneath, with Morrow himself also signed by artist Penny Taylor (aka Taylored Curiosities). This one-of-a-kind piece is available now in the Taylored Curiosities online shop for £25 (approx. $38) each. http://dlvr.it/3PF5dx
NEW POST: Continuing to pump out some of the coolest, most unique robot figures around, Tesselate just sent over two new resin bots ready to hit the streets! “_Belonging to the IT series of the ED-IT DJ collaboration crew, these wild eyed guys are fresh from the factory floor. Once taken out of production (by humans) due to how intense and hyperactive they could be, they were reactivated after the passing of the 2068 Law of Awareness. The Z9900_k series primarily work at Accex Systems creating drum machines, and can sometimes be found on the stage before a ED-IT DJ production working as a ‘hype crew’._” Titled “Z9900_k1” (red) and “Z9900_k2” (blue), these hand cast, hand painted resin robots will release HERE this coming Wednesday, May 22nd at 9pm (GMT UK time). There will only be 1 of each, and they stand just under 5” tall. Will you be lucky enough to snag 1? http://dlvr.it/3Nt5rr
NEW POST: Well how about a peek at Clutter’s next toy release for their upcoming ‘Toy Mafia’ get together, and as we previously showed you, Mark Nagata has a really cool release and now we see a drop from Ultimate Skull and Cobra with a run of 10 “Roid Randy” figures! These stand approximately 6” tall, are hand-casted in solid resin, feature 4 points of articulation, and will be up for grabs for $65 a piece, exclusively at Clutter’s May Toy Mafia Party next Saturday, May 25th! I dig the pink/black combos… Clutter’s primary colors, of course! Remaining pieces, if any, will be available on the Clutter Webstore on Monday, May 27th at 12pm EST. http://dlvr.it/3Nlfqt
NEW POST: What is ‘Nemori’??? Well, what better way to explain it, than to directly quote the creators… “_Join us on an adventure of magic, mystery and adventure in the world of Nemori. Created by artists Cris Rose and Sarah Miskelly, this new art studio will be creating beautiful artworks in the form of limited edition resin toys and prints._” This sounds like it’s going to be all kinds of goodness wrapped up in a nice package with a bow on top… and seeing as Cris and Sarah are both super talented artists, the sky’s the limit! More on this very soon… and in the meantime, hit up the official Facebook page HERE for up to date info drops! http://dlvr.it/3NWV7v
NEW POST: The 6” Green and Blue Skeleton Double Cast RAAAR!s are now available from the folks over at Dynamite Rex! Featuring paint treated bone colored opaque resin, encased in green or blue tinted clear resin, these little dino’s look extremely cool! These weigh nearly 2lbs each, and feature an articulated head! Each one is meticulously Handmade by the super talented folks over at Mana Studios of Orange County, and each colorway is limited to just 20 each… so what are you waiting for? Get yours online at Dynamite Rex or at Art Attack Toys or at while supplies last. http://dlvr.it/3NVm0B
NEW POST: May is a good month for @erickscarecrow and his ESC Toys crew…. or should I say it’s a good month for all us ESC Toy fans because just announced is a whole slew of new releases! First up is “Daibutsu Eki” by @erickscarecrow x Monster Kolor. This 7” hand painted resin figures is signed, numbered and limited to only 5 pieces worldwide. These will be up for grabs, TOMORROW, May 17th at 11am EST in the ESC Shop HERE for just $200 a pop.
Next is a rad new version of Erick’s Crow Crow Bear that he is calling the “REDDDS 001 & 002”. This 7” hand painted resin figure is signed, numbered and limited to only 2 pieces worldwide. These look extremely cool… gotta love those red/blues! Pick one up HERE for $250!
Missed out on this last time??? Well, these are being offered up once again as the beautiful “Black & Red” Liberty by @erickscarecrow Artist Proofs will come with a signed print and each 11” figure is signed by Erick as well! They will be up for grabs HERE for just $200 each!
Finally… a fan favorite, and rockin a new paint job, the “24K Blitz” Dizign by @erickscarecrow. Limited to only 5 pieces worldwide. Each 10” vinyl figure is signed and numbered by Erick and can be picked up HERE for just $150 each! http://dlvr.it/3NVMH5
NEW POST: If you paid attention to the cool “Toys Are Us” exhibition last month, then you noticed @LYS0L ’s über-sweet new resin action figure “Nex.” During the show there were three versions available but only two were listed as exclusives… the third, pictured above, was always intended to be the original colorway and the one the artist wanted most people to be able to buy. As such, this version of “Nex” will be available from Friday, May 17th at 2PM until Sunday, May 19th, 2013 at 9PM Pacific time in the @LYS0L ‘s web shop for $40 apiece; this is an open edition pre-order with pieces expected to start shipping a mere two weeks later. http://dlvr.it/3NQCYB
NEW POST: What’s your one stop shop this week… our I guess in this case, your two stop shop as the folks behind both Mighty Jaxx and Plastic Foundry are releasing some seriously cool art pieces, all of which I am sure will tickle your fancy. First up, the brand new resin Hug the Killer “BLEU” edition. This piece is limited to just 50 pieces, and is painted in light blue… oh,and if you are familiar with other Mighty Jaxx releases… this Hug the Killer is compatible with the previously released Tomenosuke Bad Apple exclusive. These are going to retail for just $50 a pop and will be up for grabs HERE at 7pm PST starting tomorrow May, 16th!
Now onto the Plastic Foundry goodies… which by they way will drop on May 17th at 7pm PST… first up is and amazing 1-off sculpture by the super talented Swedish artist Jacob Petersson. Entitled “Myling #1”, this art sculpture was created by using clay, fabric, wood, and other mixed media… and hot damn does it look amazing! Standing at almost 10” tall, this will retail for only $350… and like mentioned earlier… it’s a 1-off… so I am almost certain it will go fast! Next up is a duo of prints, measuring 16.5” X 23.4” Archival Pigment Print on 300gsm Matt Cotton Fine Art Paper Giclee Print, “Albus Lepus” by Cuddly Rigor Mortis, and “Obey your Master” by Clogtwo are limited to just 50 pieces each and will retail for $40 a pop… some seriously cool releases that can be found on the Plastic Foundry website at the above date and time… which ones are you gonna try to get? http://dlvr.it/3NG0cC
NEW POST: The first wave of DMS’s hand painted Mini Mecha figures will be coming to his online store HERE this on Friday, May 17th at 6pm BST. These little guys measure in at just under 3” of hand cast resin, and feature a weathered and battle damaged paint job… so cool! They are available in “Blue Steel” (limited to 5 pieces) and “Corroded Chrome” (limited to 11 pieces) colorways, and each comes with a fitted resin base… and these are just $20 a piece!!! http://dlvr.it/3NFS6c
NEW POST: After debuting the new limited edition colorways of his too-cute-for-words resin figures at Chromacon (New Zealand’s major art & comic event), Paul Shih prepares to unleash his newest adorable editions upon the masses: “Sushi Kaiju” in the “Sakura Flavored” colorway (above) and “BEVIL” in the “Aqua Edition” (below). Limited to a mere 10 copies each, the remaining copies on May 17th, 2013 at 1PM Pacific time in his web shop! Prepare for the F5 battle of our life for cute domination to commence!
NEW POST: Featuring a resin-cast head created from an original sculpt, Squink’s “Happy Dream Man 2” custom 3-inch Dunny figure is prepared to be unleashed in the newest one-off colorway: “Ghost.” This one-of-a-kind hand-painted version is hauntingly beautiful, with the subtle coating of flourish marks across the body and that glass bead necklace accessory defining the neckline. Included with this piece is a signed & titled eco gift box as well as a numbered collector’s card. “Ghost” will be available on May 15th, 2013 at 12 Noon Pacific time in the Squink! store for £65 (approx. $99).
NEW POST: As part of Matt Anderson’s Night Terror Series 2, he asked many artists to be involved, and NemO was one of said talents behind the above “The Poisonous Terror Dart Frog”! This rad looking custom will most likely be up for grabs at @NY_Comic_Con 2013, but nothing has been confirmed just yet. One thing we do know… the last series sold out in a matter of seconds, and with customs like the one from NemO, I can only assume this series will do just as good! http://dlvr.it/3Mk199
NEW POST: The double cast phenomenon started with Scott Wilkowski’s contribution for the Custom Yoka Show that debuted at the 2009 DesignerCon and toured around the country in 2010. Wilkowski also launched his Infected concept with that show, making — I believe — three colorways of resin skeletal system inside resin cast Yoka exterior: silver, orange with black, and black with concussion. It was a fantastic and innovative design that, if memory serves, was used on the front of the show flyers even. Well, now Wilkowski is revisiting it, issuing forth the “Original Cave Bear” version of the Infected Yoka figure, with light green skeletal system inside a purple Yoka-shaped shell. This limited edition 2.5-inch tall figure is available right now on Wilkowski’s website for $80 apiece. http://dlvr.it/3MZDjD
NEW POST: Hard to believe that only last year we all had a Swanicorn-shaped hole in our hearts that needed filling, but it’s true… Tomorrow (May 12th, 2013) marks the celebration of Daniel Fleres’s Swanicorn turning a full year old! And what would a Swanicorn party be without, well, Swanicorns? So Fleres has specially bred three brand new beauties (pictured below) for you to “oh,” “ah” and click “Add To Cart” over: Spring Rider Swanicorn, Swanicorn Bee, and Little Mermaid Swanicorn! But that’s not all Fleres has in store for everyone: on his Instagram feed he’ll be doing a giveaway of a Breed-Your-Own Swanicorn (known by some as a Blank DIY Swanicorn)! So give his Instagram a follow and we’re anticipating that the three one-off breeds will appear in Fleres’s web store around 12 Noon Pacific time tomorrow (May 12th, 2013).
NEW POST: ArtmyMind’s 2-inch tall “Hellhound” resin creation springs forth from the abyssal depths in which it was forged once again, revealing two new and wondrous editions to add to your collection: the Orchid (above left) and Jade (above right) versions. Each of these hand-cast colorways — made from an original sculpt — are limited to only 10 pieces worldwide. They are both available now in the Artmymind online store for $45 each. http://dlvr.it/3M8nVv